Technology once again innovation, auto-polarity detection. you do not have to distinguish the polarity of the battery. as long as the battery is battery, can be charged. Do not worry about battery polarity. Good charger.
In addition to auto-polarity detection, there is a strong visible digi-dispaly. visually beautiful. Function sets the Lii-100, very good.
Input: Micro USB DC 5 V / 1A (min.)
Output voltage: DC 4.2 V 500mA / 1000mA for Li-Ion
DC 4.35 V 500mA / 1000mA for IMR
DC 3.65 V 500mA / 1000mA for LeFePO4
DC 1.48 V 500mA / 1000mA for NiMH / NI-Cd
constant voltage with cut-off current less then 100mA
Standby current: Not more than 15mA
compatible for batteries:
li-ion / IMR / LiFePO4: 26650, 21700, 20700, 18650, 18490, 17700, 17500, 16340 (RCR123), 14500, 10440
ni-mh / Cd: AA, AAA, A, SC, C size
size (mm) / weight (grams):
length 112mm x width 37mm x height 32mm
45 grams (charger) + 17 grams (USB cable) included in delivery
1, One-slot charging and management system, Micro USB DC 5V input port
2, battery polarity auto-detection (any polarity)
3, 500 mAh / 1000 mAh charging current for selection
4, built-in digital tube display shows the charging status of voltage and current
5, identify Li-ion and Ni-MH battery automatically
Choose manually by short-press the mode button for IMR battery (3.85V Li-ion) and LiFePO4 battery (3.2V)
6, activation function for 0V battery PCM protection.
7, can not battery with 0.0 & # 8806; U <0.2V for NiMH / Cd and 1.6 & peseta; U <2.2 V for Li-Ion
8, overcharge and over-discharge protection
9, identify broken / broken battery
10, charge under constant voltage and current
It is a "MODE" button for choosing the battery types and charging current
Long press the "MODE" button for 3 seconds to change the charging current, you can change the charging current anytime
Just press the "MODE" to change the charging types of lithium batteries. If no adjustment, it will default to 1.2V Ni-MH or 3.7V Li-ion battery automatically. You must change the mode for 3.85V li-ion and 3.2V LiFePO4 battery
It starts to charge the battery 5 seconds after your settings
if the battery is inserted or defective battery is inserted, the charger will have no response showing "zero"; When the battery is fully charged, it shows "Full"
It can charge the battery voltage and charging current by briefly pressing the "MODE" anytime during the charging process